o.t.c

DESCRIPTION:

• The Premier TENS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups.
• This unit is a TENS used for pain relief.
• The device is provided with two controllable output channels, each independent of the other.
• A pair of electrodes can be connected to each output channel.
• The intensity level and settings are controlled by press buttons. 
   

 

MECHANISM TECHICAL DESCRIPTION 01 Channel Dual, isolated between channels 02 Pulse Amplitude Adjustable, 0-110 mA peak into 500 ohm load each channel. 03 Wave Form Asymmetrical Bi-Phasic Square Pulse 04 Voltage 0 to 55V (Load: 500 ohm) 05 Power source One 9 Volt Battery. 06 Size 11.8cm(L) x 6 cm(W) x 3.1cm(H) 07 Weight 157 grams with battery. 08 Pulse Rate Adjustable, from 2 to 150 Hz, 1 Hz/step 09 Pulse Width Adjustable, from 50 to 300 microseconds, 10 ?s/step 10 Mode Five TENS Modes: B(Burst), N(Normal),M (Modulation Rate & Width),S1( Modulation Width), S2 (Modulation Width) 11 Burst Mode Burst rate: Adjustable, 0.5 ~ 5Hz Pulse width adjustable, 50~300 ?s Frequency fixed = 100 Hz 12 Normal Mode The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value. 13 Modulation Mode Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300?s) are fully adjustable. 14 S1 Mode Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 40% less. The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable. 15 S2 Mode Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 70% less. The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable. 16 Timer Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step. 17 Patient  Compliance Meter This unit can store 60 sets of operation records. Total recorded time is 999 hours. 18 Low Battery Indicator A low battery indicator will show up when the battery is low. 19 Operating Condition Temperature:0?-40?C Relative Humidity: 30%~75% Atmosphere Pressure : 700Hpa~1060Hpa 20 Remark There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.